Solar Charge Controller Regulator 10A 12V/24V 240W is the second generation of solar charge control. it provide automatic lighting control function with Fully automatic operation & Electronic protections and Four load working modes: Pure lighting control, lighting control &timing control, hand operation and debug mode. This charge controller Detects day and night using the PV array, timer setting you can use on pathway lighting ,street lighting ,parking area ,bus station and etc.
Features
- Built-in industrial microcontroller
- Built-in short circuit protection
- built-in open circuit protection
- reverse protection, over-load protection
- one-key setting
- auto memory function
- digital display
- Fully 4stage PWM charge management
- dual mosfet reverse current protection
Specification
- Rated charge current: 10A
- Rated load current: 10A
- Work voltage: 12/24 V Auto
- Over load,short circuit protection: 1.25 rated load current 60 sec., 1.5 rated load current 5 sec. , over load protection action. ≥3 Rated load current short circuit protection action
- No load current: ≤6mA
- Charging circuit voltage drop: ≤0.26V
- Load circuit voltage drop: ≤0.15V
- Over voltage Protection: 14.8V
- Work temperature: industry stage -35C to +35C
- Boost charge voltage: 14.6V (keep 10min.)
- Direct charge voltage: 14.4V (keep 10min.)
- Float charge voltage: 13.6V
- Charge return voltage: 13.2V
- Lower voltage indicate: 12V
- Over discharge voltage: 11.1v (no load)
- Over discharge return voltage: 12.6V
- Controle mode: PWM charge mode;modified discharge voltage by the discharge rate
Notes:
- Battery cable must be short as possible to minimize loss
- Before first intallation make sure that battery has enough voltage for the controller to recognize battery type
- Use only lead acid batteries OPEN,AGM,GEL and never use nickel metal hydride, lithium ions or other battery
- The charging regulator is only suitable for regulating solar modules, never connect another charging source to the charger regulator
